Administration

  • Galaxy PRI Card
PRI Card – Overview
NOTE

The Galaxy PRI card has been replaced by the Galaxy E1/T1 card.

GEPRICardv4.png

The Galaxy PRI-1 card provides a standard high speed (T1, or 1.544 Mb/s) interface for 23 voice channels.

Front Panel

GEPRIPanelv3.png

InterfaceDescription
USBNot used in Galaxy Expand configurations
Type: USB 2.0 A
HDMIProvide access to the processor video feed for creating a headed system  for troubleshooting.
Type:  HDMI Type C
ETH

Default IP Address: 192.168.1.175
Type: RJ-45

Note:
In a Galaxy Expand using default UCX IP addressing this card will also receive a DHCP address on the 192.168.100.xxx subnet from the backplane.
If on a Galaxy Express, it will recieve a DHCP address from whatever network the Eth2 connector on the chassis is connected.

ButtonsDescription
RSTReset the card and restart the UXc software.
InterfaceDescription
RUNSlow Blink (Green 2s and Flash 0.1s) Indicates the card software is running normally
Fast Blink (Green 0.5s and Flash 0.5s) indicates abnormal situation
No Blink: Dahdi Error
PWRGreen: indicates that the card is receiving power from the Galaxy Expand chassis
Print Friendly, PDF & Email

Contents