When unpacking the Galaxy Mini system, please ensure that you received all the equipment that is listed on the shipping box.
The Galaxy Mini base system package includes the following items:
1 x Galaxy Mini Appliance
1 x Power Adapter and Cord (12V, 2.33A)
1 x Ethernet Cable
1 x Package of Rubber Feet (6)
1 x Mounting Screws (4)
FXO and/or FXS Modules are ordered separately.
Wall Mount
The following diagram depicts the spacing of the holes on the bottom of the unit designed for wall mounting. If printed from this web page it will not necessarily be recreated at proper scale, so it is for layout informational purposes only.
Front Panel
The Galaxy Mini has an internal “UPS” battery that detects the loss of power from the Power Input connection (see below). If power is lost, the Galaxy Mini will enter a power saving mode and begin executing a shutdown process. The system will beep until it is completely shutdown. This process can take approximately one minute to complete. Reconnecting the power prior to the completion of the shutdown process is not recommended.
The RST (Reset) Button is used by the Galaxy Mini to initiate an immediate shutdown of the system, bypassing the power saving mode that uses the internal UPS battery. This is the most reliable and quickest method for recycling the power on the Galaxy Mini, i.e. depressing the RST button for at least 0.25 seconds, waiting for the shutdown to complete, then disconnecting and reconnecting the power.
Note that if the RST (Reset) Button is depressed for at least 0.25 seconds the system will be shutdown and you will be required to unplug the power from the unit and plug it back in again to restart the system.
LED Indicators
| LED Indicator | Color | Status | |
|---|---|---|---|
| Power Indicator (PWR) | Green: Continuous | Power is ON | |
| Status Indicator (RUN) | Green: Flashing (1 sec) | Normal Operation | |
| Ethernet 0 (WAN) | Green: Flashing | Plugged-in, Active | |
| Ethernet 1 (LAN) | Green: Flashing | Plugged-in, Active | |
| Indicators for FXO Modules | Red: Flashing (1 sec) | Normal | |
| Red: Continuous | Connected | ||
| Red: Flashing (0.1 sec) | Communicating | ||
| Indicators for FXS Modules | Green: Continuous | Normal | |
| Green: Flashing (0.1 sec) | Communicating |
All LED indicators will flash during the system initialization process. The Galaxy Mini will beep once to indicate the initialization is complete. (The unit will also beep six times when power is no longer detected.)
Rear Panel
The rear panel is used solely for plugging in the included 12 VDC, 2.33 A power supply.
