Introduction
The Avaya IP phones included the J100 and the 9600 phones. They sometimes come with the H.323 protocol firmware and can be converted to support SIP protocol with the appropriate SIP firmware for the phone.
The SIP phones can register to the UCX server and function as third-party SIP phones.
The following SIP firmware releases and phones are supported:
- Avaya J-Series SIP phones.
- Avaya Deskphone SIP Release 7.1.1.0.9 for 9608 and 9611 phones.
Supported Functions
The Avaya SIP phone when registered to the UCX supports basic phone functions including message waiting indication. Advanced phone features are not supported, for example: Contact list, Speed dial, History, Paging, Auto answer, Forward button, etc.
Accessing Phone Configuration Menu
| To logout user | To access configuration menu | |
|---|---|---|
| J100 | Press Admin soft key and enter 27238# or Press the Hamburger key, and select Administrator | |
| 9611 | Press Menu key and select Logout | Press Admin soft key and enter 27238 |
| 9608 | Press Home key and select Logout | Press Admin soft key and enter 27238 then press Enter key |
From the configuration menu, you can perform the following functions:
- Select Restart phone option from the menu list to restart phone.
- Change DHCP HTTP address settings from the Addr menu.
- Change SIP Global Settings and SIP Proxy Settings from the SIP menu.
- Note that SIP Proxy must be set to Manual to change SIP Proxy server, protocol and port under SIP Proxy Server menu.
For more info on the Avaya J-100 Series SIP phones, refer to Avaya – Configure TLS and SRTP on J-100 SIP phones