Administration

  • Green Migration - Vtech
Vtech – VCS754

Introduction

The VTech VCS754 SIP Conference Phone with Four Wireless Mics is a conference phone designed to work with popular SIP telephone (IP PBX) equipment and services. Once configured with the UCX Server, the VCS754 enables you to make and receive calls as you would with any other business phone. In addition to its speakerphone and conferencing features, the VCS754 provides calling features like hold, transfer and speed-dial numbers. Features include:
  • 3 SIP lines/accounts
  • 2 fixed central, full-duplex speakerphone in base
  • 4 DECT 6.0 wireless microphones

Configuration

IMPORTANT

E-MetroTel has been successful in creating interoperability with the referenced phone using our open SIP Standards implementation. E-MetroTel is not responsible for maintaining interoperability support should the manufacturer modify the behavior of their SIP implementation in subsequent releases.

Step 1 – On the UCX Server

  1. Login to UCX Administration
  2. Navigate to PBX – PBX Configuration – Extensions page
  3. Add an Extension for a Generic SIP Device with the following basic parameters:
    • User Extension (e.g. 631)
    • Display Name
    • secret
  4. Click on Submit to create the extension
  5. Press the Apply Config bar at the top

Step 2 – On the VCS754 Phone

Refer to the VCS754 Administrator and Provisioning Manual on how to access the phone’s WebUI.

  1. Login to the WebUI of the phone (default account admin, admin)
  2. Navigate to System – SIP Account Management – Account 1 page
  3. Enter the following basic parameters:
    • Select the Enable Account checkbox
    • Display Name
    • User Identifier – Enter the User Extension from STEP ONE (e.g. 631)
    • Authentication Name – Enter User Extension from STEP ONE (e.g. 631)
    • Authentication Password – Enter the secret from STEP ONE

    ​

  4. Enter the UCX Server IP address in the following fields:
    • SIP Server – Server Address
    • Registration – Server Address
    • Outbound Proxy – Server Address

  5. Press the Save button at the bottom of the page and the phone will reset
  6. When the phone comes back, it is provisioned and ready to send and receive calls

Step 3 – Additional Settings

You can repeat Step 2 to configure multiple SIP lines (up to 3) for the phone by navigating to the System – SIP Account Management – Account X page.

See Programming Feature Keys on Vtech phones for details on the features supported.

Contents