1.0 System Settings
1.1 System Status
On the System Status page, you will find Interface and Channels status, as well as SIP, IAX2 , Routing, and Network Information.
Description
Down: there is no trunk connected.
(Note that the diagram shows a North American 24 channel configuration.)
Busy: channel is busy
Disable: the channel is unavailable
S Channel: the channel is used for signaling
1.2 Call Status
The Call Status page provides additional details of the active calls on the channels.
1.3 Time
Description
Time Zone: Choose the world time zone setting for your location
POSIX TZ String: Shows the equivalent Posix timezone string
NTP Server 1, 2, 3: Time Server domain or hostname (You can also set NTP Server 1 to be the address of the UCX.)
Auto-Sync from NTP: Choose whether to enable or disable the automatic synchronization with the NTP server (On/Off)
Sync from NTP: Click this button to once the system to synchronize with the designated NTP server
Sync from Client: Click this button to synchronize the time from local machine
1.4 Login Settings
You may modify login parameters for web browser access and SSH access. You can also disable SSH access.
Description
Login Mode: Specify the web login mode: http and https or only https. Default is http and https.
Port: Specify the web server port number. Do not use port 443 (reserved for HTTPS).
Save: Save the updated settings.
1.5 General
Language
The default language setting is English.
Scheduled Reboot
You may enable or disable the ability to schedule automatic reboots for the system.
Description
Reboot Type: By Day, By Week, By Month, or By Running Time
Time: The time setting for when the scheduled Reboot will occur (values based on Reboot Type: Hour of Day, Day of Week, Day of Month, Number of Days and Hours)
Save: Save the updated settings.
1.6 Tools
Reboot Tools
Click the button representing the type of reboot you wish to perform; System Reboot or Asterisk Reboot. Click OK to confirm.
Description
Asterisk Reboot: Will restart the Asterisk component of the system, and will cause all calls to drop.
Update Firmware
Use this section to update the firmware on the PRI-1 Card. This update should only be performed as advised by E-MetroTel support.
Upload and Backup Configuration
If you want to update your system but retain your current configuration, use the Backup Configuration to create and download a current backup, update your system, and then choose Upload Configuration and choose the backup file you just downloaded.
Restore Configuration
Restore Configuration will reset the system back to factory default values.
1.7 Information
The Information page provides details of the model name, firmware version, firmware build, hardware version, number of ports available (1), storage and memory utilization, and kernal build date. It also provides system up-time and the current system time.
Memory Clean Is a tool for manually clearing the cache and is not normally required.
