This page provides instructions on installing the Universal Rack Mount for the following Galaxy appliances:
- Galaxy Express
- Galaxy Mini V2
- Galaxy Pro
The order code for the Universal Rack Mount is HOGLXC-URM.
Prerequisites
- #1 Philips-head screwdriver
- Universal rack mount package
- Rack mount
- 3 x short screws with washer (A). About 0.35 inches.
- 2 x long screws (B). About 0.75 inches.
Rack mount
- 2 x server rack bolts and 2 x cage nuts.
Cage Bolts and Nuts
Server Rack
Determine if the rack mount will be installed on the left or right side of the server rack
Attach the cage nuts to the server rack starting from the back. The lip of cage nut is going to be facing you and aligned horizontally.
Galaxy Express
Take off the screws in the red highlighted areas. Start from the side that is closest to the slots where you will plug in a gateway card.
Place the rack mount onto the Galaxy Express.
Screw in the provided short screws (A) into the sections highlighted in blue.
Align the universal rack mount with the nuts and then screw in the universal rack mount to be attached to the server rack mount.
Galaxy Mini V2
Take off the screws in the red highlighted areas. Start from the side that is closest to the slots where you will plug in a gateway card.
Place the rack mount onto the Galaxy Mini V2.
Screw in the provided long screws (B) into the sections highlighted in blue.
It is best to align the screws and then alternate screwing. This is due to the hump from black rubber, if one side were to be screwed in fully first, then it will be difficult to screw in the other side.
Align the universal rack mount with the nuts and then screw in the universal rack mount to be attached to the server rackmount.
Galaxy Pro
Take off the screws in the red highlighted areas. Start from the side that is closest to the slots where you will plug in a gateway card.
Place the rack mount onto the Galaxy Pro.
- Have the rack aligned to the front of the Galaxy Pro with the display.
- Left mount: alignment will have two screws exposed on the back.
- Right mount: alignment will have three screws exposed on the back.
Screw in the provided short screws (A) into the sections highlighted in blue.
Align the universal rack mount with the nuts and then screw in the universal rack mount to be attached to the server rackmount.
