Administration

Infinity 5000 Series (XSTIM) – Web User Interface

Accessing Web Interface

First obtain the IP address of the Infinity phone:

  1. From the phone, double press the Hold  button.
  2. Select Status and take note of the IP address displayed under the IPV4 field.
  3. From a web browser, enter the IP address noted above.
  4. Login to the web interface with the username admin and the administrator password.
USEFUL TIP

There are 2 possible default administrator passwords:
admin - for older phones
363870835  - for newer phones

Home

The home page provides a status summary of the phone that includes information like: model, firmware version, server, network, memory and uptime.


Network

Network – Basic

The basic network properties typically do not need to be changed. By default the phone will obtain its network configuration from a DHCP server.

To configure static Primary DNS and Secondary DNS, toggle the Static DNS field to Yes first.

Note that the Primary DNS and Secondary DNS values will be used (if configured) if Static IP Address is selected regardless of whether Static DNS is set to Yes or No.


Network – PC Port

The user can plug a PC into the PC port on the back of the phone and share the network connection. Keep the default PC Port configuration: As Bridge.

If connecting Infinity 5042 expansion module to the 5010W phone, the PC Port MUST be set to: Connect to Expansion Module.

Network – Advanced

SECTIONFIELDDESCRIPTION
Web ServerTypeIf the value is set to Disabled, you will lose access to the Web Interface. The default value is HTTP&HTTPS.
VPNAll fieldsNOT SUPPORTED.



Network – WiFi

WiFi can only be turned ON from the phone interface. See XSTIM – Wifi for details.

This page is only available for the 5010W model phone. When the WiFi Mode is set to Provision, the network parameters can be configured here:

  • SSID
  • Password

Setting

Setting – Preference

The supported fields are listed in this table.

FIELDDESCRIPTION
Web LanguageChanges the language for the web interface
LCD Font SizeControls the font size of text displayed on the screen.
Handsfree AGC

Automatica Gain Control is set to Enable by default. It automatically adjusts the audio level when when it is too loud or too soft. This applies to Handset and Handsfree mode.

Set to Disable if manually adjusting the send volumes for Handset or Handsfree.

Volume Amplification

Handset Send Volume
Headset Send Volume
Handsfree Send Volume

To increase the SEND volume, set to postive dB.
To decrease the SEND volume, set to negative dB.

*Note: Disable Handsfree AGC if adjusting the send volume for Handset or Handsfree.

Volume Amplification

Handset extra loud
Headset extra loud
Handsfree extra loud
To increase the RECEIVE volume, select the desired level.
Call Waiting Tone Volume When TalkingTo adjust the volume of the call waiting notification tone when you are active on a call.
Backlight Inactive LevelLight intensity when backlight is inactive. Available only for 5010W model phone.
Backlight Active LevelLight intensity when backlight is active. Available only for 5010W model phone.
Backlight TimeBacklight time out in seconds. 0 means never timeout.
Screen Time OutScreen time out in minutes. Off means never timeout.
Expansion screensaver timeNot used. Screen for the expansion module will be synchronized with the main phone.
Text LogoText to be displayed when in screensaver mode. Text can be multiple lines, use semi-colon ; for a new line. Text is displayed only when screensaver type is time & logo
Screensaver TypeSelect the screensaver type or the screensaver photo.
Upload Screen PhotoUpload your own photo to be used as screensaver. Select the photo and click the Upload button.
Screensaver PhotoSelect the screensaver photo to delete and click the Delete button.


Setting – Sleep Mode

The Sleep Mode feature provides protection to the LCD screen by putting the screen to sleep when the phone is not in used.

The feature is enabled by default and cannot be disabled. It is an important feature to protect and extend the life of the LCD screen.

The sleep mode activates after a certain period of inactivity, this timeout period has 2 settings:

  • Office Hour Timeout – timeout period in minutes during office hours (default 60 minutes)
  • Free Hour Timeout – timeout period in minutes after office hours (default 10 minutes)

The Office hours are configurable from Monday to Sunday, accepted values are from 00 to 23 (default is 07 – 21).

Directory

The Directory page is currently not supported. It is reserved for future use.

Management

Management – Password

The default admin password can be changed here.

Management – Upgrade

Reset to Factory: This page can be used to reset the phone’s configuration back to the factory default. It will not change the firmware.
ROM Firmware Upgrade: The phone’s firmware can be manually updated here.
Make sure you clear the Firmware Server Path and Config Server Path on the Auto Provision page first before performing the manual firmware upgrade here.

Management – Auto Provision

Configure the phone to automatically retrieve the latest configuration file and firmware from the E-MetroTel repository.

FIELDDESCRIPTIONDEFAULT VALUE
Upgrade ModeSelect upgrade mode. E-Metrotel public repository only supports HTTP and HTTPS.HTTP
Firmware Server PathSpecify URL path to retrieve firmwarerepo.uc-x.org/infinity.fw
Config Server PathSpecify URL path to retrieve XML configuration filerepo.uc-x.org/infinity.cfg
AUTO UpgradePerform automatic firmware upgradeYes
Power OnPerform automatic firmware upgrade when phone is powered onYes
RepeatedlyCheck for firmware upgrade at fixed intervalsYes
    Check for upgrade everyFrequency of firmware upgrade check10080 Minutes
WeeklySchedule check for firmware upgrade weeklyNo
    Weekly Upgrade IntervalFrequency in weeks. Enter value 0 – 12.
If 0 is entered, upgrade will occur on all the selected days.
If 2 is entered, upgrade will occur every 2 weeks on one of the selected days.
0
    Inactivity Time ExpireThe duration of inactivity before upgrade can occur0
    TimeThe time range when upgrade can occur. If the start and end time is the same, then upgrade will occur at exactly the specified time.00:00 – 00:00
    Day of WeekThe day of the week that upgrade can occur. If none of the days are selected, then upgrade will NOT occur.All days unselected
Flexible Auto ProvisionSchedule check for configuration XML file dailyNo
    Flexible Interval DaysFrequency in days. Enter value 1 – 1000.1
    Flexible TimeThe time range when auto provision can occur. If the start and end time is the same, then auto provision will occur at exactly the specified time.00:00 – 00:00
Upgrade EXP FirmwarePerform automatic firmware upgrade for the expansion modulesNo




Management – Configuration

The Device XML and Device BIN files can be downloaded and saved, then restored on the same phone or another phone. When naming the device configuration file, DO NOT use spaces. The restore will not work if there are spaces in the filename.

The System Log file can be downloaded and is useful for troubleshooting purposes.

Management – Tools

Pcap Feature can be used to capture network packets for troubleshooting purposes.

Lcd Screen takes a snapshot of the phone’s LCD screen and saves it as a BMP file on the user’s computer.

Management – Restart

Management – Reboot

Contents