Trunk Setup Information

Telus provide the following parameters in the information sheet provided to their SIP Trunk account users.

Registration Information

Trunk Pilot / BTN: 1234567891   (account specific ten digit string)
SIP Domain: dynsipt.broadconnect.ca
Authentication Username = 1234567890 (account specific ten digit string)
Authentication Password = PaSsW0rdfROmTeLuS     (account specific Alphanumeric string)
SIP Proxy Address: proxy1.dynsipt.broadconnect.ca
                                  proxy2.dynsipt.broadconnect.ca

Channels: n (account specific number of channels)
DIDs: 1234567891, 1234567892

Notes:

Turn on SRV Lookup
The PAI Header must be Pilot/BTN  = [email protected]
CPE PBX send Register Request to SIP Proxy Address

Create the Trunk

The configuration below shows the settings for a Telus SIP trunk using the IP Trunk Assistant tool.

Account Name: Create a unique entry for to identify the Telus SIP trunk on the UCX
Trunk Provider: Choose Custom
User Name: Use the 10 digit Authentication Username supplied by Telus (see above)
Secret: Use the Authentication Password supplied by Telus (see above)
Outbound CallerID: Use the 10 digit Pilot /BTN supplied by Telus (see above)

Type: peer
Qualify: yes
Insecure: very
DTMF Mode: rfc2833
DTL-SRTP: no
Technology: SIP
Can Reinvite: no
Send RPID: no
Trust RPID: yes
ICE: no

Host / IP:  proxy1.dynsipt.broadconnect.ca (one of the proxy addresses provided by Telus – see above)
Context: from-trunk
Disallow: leave blank
Allow: leave blank
From User: one of the DIDs provided by Telus – see above)
From Domain: dynsipt.broadconnect.ca (the SIP Domain provided by Telus – see above)