Administration

UCX Administration
Support – Packet Capture

UCX Administration can be used to capture packets on any of the available network interfaces (e.g. eth0, eth1). This section describes Packet Capture related functions.

  • Start
  • Stop
  • Delete
  • Download

Start

To Start Packet Capture, perform the following steps:

  1. From the Support tab, select Packet Capture.
  2. Choose the network interface where the packet capture will be started from the pull-down list and click the Select Interface button.
    (The option to select interface is available only when the UCX system has more than one network interface available (e.g. eth0, eth1). If the system has only one interface available (e.g. eth0), the default interface is set to eth0.)
  3. If you want the capture to stop automatically after a set time, select the desired time from the pull-down list and click the Set Time Limit button.
  4. Click the Start Capture button to start the packet capture.

Stop

To manually  stop packet capture, click the Stop Capture button.

When the Packet Capture is stopped, the capture file is converted to a compressed format (.ZIP) right away and is displayed on the page.

Delete

To Delete Packet Capture File(s), perform the following steps:

  1. Select the files to be deleted and click the Delete button
  2. If you have multiple files, you can delete all the files using the Delete All button


Download

To Download a Packet Capture File to the local machine, click on the file name and that will initiate download of the compressed capture file (.ZIP) to the local machine.

Contents