Administration

UCX Administration
  • PBX, UCX Administration
PBX – MDSE

Installing License and Software module

The MDSE module to support M1/CS1000 Media Gateway(s) is a licensed feature. Addition of the MDSE module allows integration of Nortel  M1/CS1000 Taurus and Aries series digital phones.

The support for analog phones is a separate licensed feature (MA) on top of the MDSE license.

Install Meridian Digital and Analog Set Support License

  1. Open UCX Administration.
  2. From the System tab, select Licenses.
  3. From the left side column, select Enter License.
  4. Click the Retrieve & Apply button.

Install the Software Package

  1. Navigate to Accessories – Addon Packages page. 
  2. Scroll down the page and look for the Meridian Digital and Analog Set Support module (MDSE).
  3. Click the Install button.

 

Configuring Media Gateway(s)

Configuring New Media Gateway On UCX Server

Perform the following steps to configure the Media Gateway on the UCX server:

  1. Open UCX Administration.
  2. From the PBX tab, select MDSE.
  3. Select New Media Gateway to add the MGC.
  4. Enter the MGC configuration values.
  5. There are two new fields from Release 6.0 and up:
    • Remote Gateway – When set to No, the External IP Address field is disabled. When set to Yes, the External IP Address field is enabled.
    • External IP Address – This field is required when enabled.


    Each Remote MGC registering to the UCX must have a unique External IP address.

  6. Press the Submit button.
DNS Configuration

The UCX system's DNS must be configured correctly before configuring an MGC card, see the Network Parameters page. Be sure that one of the following conditions apply, otherwise the MGC will not work properly:

  • If the UCX system has internet access, then the DNS and Default Gateway must have VALID IP addresses. This must be validated before attempting to configure an MGC card.
  • If the UCX system does not have internet access, DO NOT program any IP Address in the DNS field, only program the Default Gateway IP address.

    • Modify Existing Media Gateway On UCX Server

    Perform the following steps to change an existing Media Gateway on the UCX server:

    1. Open UCX Administration.
    2. From the PBX tab, select MDSE.
    3. Press the Edit button corresponding to the Media Gateway to modify.
    4. Update the MGC configuration values.
    5. Press the Submit button.

    Delete Media Gateway On UCX Server

    Perform the following steps to change an existing Media Gateway on the UCX server:

    1. Open UCX Administration.
    2. From the PBX tab, select MDSE.
    3. Select the Media Gateway(s) to delete from the list of configured Media Gateways.
    4. Press the Delete button.
    5. Confirm the delete.

    Configuring Firewall

    This section lists the TCP and UDP ports used by UCx to control an MGC. If there is a Firewall enabled on your network, firewall rules need to allow communication with the ports listed here.

    TCP Ports

    Port Description
    20 FTP Data Transfer
    21 FTP Control
    111 Sun RPC
    634 IP RPC
    2010 Port Mapper
    15000 PBXLINK
    32780 CARDLAN
    32781 SSD
    32784 TTY
    32788 IP RPC
    40457 Sun RPC

    UDP Ports

    Port Description
    111 Sun RPC
    5200 – 5360 RTP ports for VoIP (even ports only)
    15000 PBXLINK
    15001 RUDP Broadcast
    32778 IP RPC
    32779 IP RPC Inst
    32780 CARDLAN

    Contents