Administration

UCX Administration
Applications – Languages
USEFUL TIP

This page describes the steps to change the language for a call flow. For other methods, see UCX Software - UCX Features - Language prompts.

Overview

There are three methods to change the language prompts on your UCX system:

  1. Add a Language instance to change the language for a call flow
  2. Change the language used for SIP phones
  3. Change the language used for XSTIM phones

UCX supports the following languages:

Language Code
Language
enEnglish (default)
en-ukEnglish – UK
en-auEnglish – Australian
esSpanish
frFrench
ruRussian
zhChinese-Mandarin
csCzech
deGerman
plPolish
itItalian

Prerequisites

First you need to have the desired language voice prompts package installed on your UCX. Go to the Accessories page to view the currently installed packages:

  • Go to Accessories -> Addon Packages page
  • If your desired language voice prompts is not installed, then click on the Install button

Changing Language prompts for a Call Flow

First you have to decide where you want the language change to take place. It can be in your Inbound Routes, IVR, Misc Applications etc.

For the example below, we will use a call center scenario to describe the language change call flow:

  • You have an IVR that will prompt the caller to press “1” for English and “2” for Mandarin
  • When “1” is pressed, the call will be directed to a queue with English speaking agents and the prompts are all in English
  • When “2” is pressed, the call will be directed to a queue with Mandarin speaking agents and the prompts are all in Mandarin

Step 1 – Create the destination Queues

Create one queue for the English speaking agents (e.g. English queue) and one queue for the Mandarin speaking agents (e.g. Chinese queue).

See Queues for details on creating a queue.

Step 2 – Create Language Instance

To create a new language instance, perform the following steps:

  • From the PBX tab, select PBX Configuration
  • From the left side column, under Applications, select Languages
  • Enter a Description for the language instance (e.g. Chinese Mandarin)
  • Enter the Language Code (e.g zh)
  • Under Destination, select the call flow destination that will now play the new language instance (e.g. Chinese queue)
  • Press the Submit Changes button

Step 3 – Create IVR

Create an IVR that will prompt the user to select the desired language:

  • From the PBX tab, select PBX Configuration
  • From the left side column, under Applications, select IVR
  • Under the Announcement field, you will need to select a system recording that will say for example “Press 1 for English, 2 for Mandarin”.
    (See System Recordings for details on how to create the recording.)
  • Scroll down to the IVR Entries section, configure the destinations for digit “1” as “English queue”, but for digit “2” instead of going to the Chinese queue, send it to the language instance created in Step 2.

Contents