To add a new DAHDI trunk, perform the following steps:
- From the PBX tab, select PBX Configuration
- From the left side column, select Trunks
- On the Add a Trunk page, which presents available trunk types, select the Add DAHDi Trunk link
5. On the Add DAHDI Trunk page, fill in all trunk specific parameters. You should configure at least the following fields:
- Trunk Name – Enter a descriptive name, e.g. Analog
- DAHDI Trunks – Select from the available trunk groups from the pull-down list
6. Press the Submit Changes button to create the DAHDI trunk
USEFUL TIP
See UCX Software - How-to Guides - Configure Analog Trunks for a complete workflow on configuring analog trunks.