To use call waiting, your phone must be configured to have 2 or more line appearances (DN keys). When you have 2 or more DN keys and call waiting is enabled, you will receive additional incoming calls until there is no free DN key.
When call waiting is disabled, you will not receive incoming calls if you have a call on at least one of the DN keys – additional DN keys can be used only to make outgoing calls.
NOTE
The Call Waiting feature is not supported on devices like analog phones that only support one line appearance.
To activate/deactivate Call Waiting
| Feature | Steps | Notes |
|---|---|---|
| To activate Call Waiting | 1. Dial *70 . | |
| To deactivate Call Waiting | 1. Dial *71 . |
To answer a Call Waiting on another line
| Phone Type | Steps | Notes |
|---|---|---|
| All phones | 1. Press the Hold key to place the current call on hold. 2. Press the Line key of the additional incoming call to answer. |
Audible Call Waiting
For E-MetroTel XSTIM phones or Nortel phones, the UCX Administrator can configure the Call Waiting Notification tone.
- From UCX Administration, navigate to PBX -> PBX Configuration -> XSTIM Settings page
- Under Advanced General Settings, set Audible Call Waiting to one of the following values:
- None – No audible indication
- Ring – Attenuated ring (default)
- Buzz – Short tone