Prerequisites
You must be able to login to the Snom PA1 SIP adapter and the UCX Server as an administrator to successfully complete the instructions on this page.- The default IP address of the E-MetroTel UCX server is 192.168.1.200.
- Refer to the Snom PA1 user guide for the default IP address.
NOTE
This product does not ship with a power supply. If you are not using a POE enabled network, you must purchase a POE injector or use a standard Snom power supply.
Configuring UCX
Step 1 – Create SIP Extension
Login to UCX Administration and navigate to PBX – PBX Configuration – Extensions page to add a new SIP extension for the Snom PA1.
Create the new SIP extension with the following parameters:
- User Extension – Enter the extension number to dial
- Display Name – Provide a name for the extension
- Secret – Enter the secret (password) for the extension
Configuring Snom PA1
Step 2 – Identity 1 – Login
- Login to the PA1 (default password is password)
- Navigate to the Setup – Identity1 page
- Under the Login tab, populate the following fields on this page:
- Displayname = Enter any text name
- Account = Enter the SIP extension number provisioned on the UCX Server in STEP ONE
- Password = Enter the secret of the SIP extension
- Registrar = Enter the IP address of the UCX Server
- Authentication User Name = Enter the same SIP extension number as the Account field
- Press the Apply button at the bottom of the page
- Then click the Save link that appears at the top of the page
Step 3 – Identity 1 – SIP
- Click on the SIP tab at the top of the Identity 1 page
- Change the value in the Proposed Expiry field to 60
- Press the Apply button and then click the Save link that appears at the top of the page
Step 4 – Setup – Preferences
- Navigate to the Setup – Preferences page
- Change the Tone Scheme field to the corresponding country tone scheme that you require.
- Press the Apply button and then click the Save link that appears at the top.