Connecting to the Card
Please refer to the Galaxy Expand – Initial Configuration for details on how to set up DHCP on the Galaxy server card prior to installing FXO/FXS cards in either the Galaxy Expand or Galaxy Express chassis. The same document identifies how to identify the IP address of the FXO/FXS card after it has been powered on within the chassis.
Logging into the Card
Begin by pointing your browser to the IP address identified in the previous section. The default username is admin with emetr0tel as the default password.
.
System – Status
When you first log in to the FXO/FXS card, the browser will open to the System / Status page, showing the Port Status tab. The Port status will show current information for each of the ports, including Port Numbers, the configured name, the status of the SIP account associated with that port and the connection status of the physical RJ-11 port including the voltage level currently measured on the port.
Port Status
SIP Status
Reports the status of the SIP connection between the card and the UCX, including the Endpoint Name, User Name, Host (UCX) address.
Routing Status
Once you have configured Routing information to identify which port maps to which SIP account, the status of that routing will be reflected here.
Network Status
System – Time
System – Login Settings
System – General
You may establish a schedule for automatically rebooting the card.
System – Tools
