DSS Keys | Customizable keys |
---|---|
Message Waiting/ Incoming call indicator |
Light flashes when there is an incoming call ringing the telephone and also when there is a message waiting. |
Volume control keys |
Press the volume +/- key to increase/decrease the volume level. |
Mute key | Press the mute key to mute the microphone while on a call. Press again to unmute. |
Speaker LED | Light is ON during hands-free/speaker mode. |
Speaker key | Press the speaker key for hands-free mode. Audio switches to the speaker. |
Hold key | Press the hold key to place a call on hold. |
Transfer key | Press the transfer key to transfer a call. |
Redial key | Press the redial key to redial the last dialed number. |
MWI key | Press the MWI key to retrieve voice messages. |
SIP Status. GREEN indicates line is registered. WHITE indicates line is unregistered. | |
Handset mode calling out. | |
Speaker mode calling out. | |
Incoming call | |
Call on hold | |
Call being transferred | |
Active call in Handset mode | |
Active call in Speaker mode | |
Microphone is muted |
There are two ways to make a call, using dial pad or DSS key:
To end the call, put the handset back onto the holder or press the Speaker key again.
When your telephone rings and the light flashes:
When the call is connected, the screen provides information about the call.
While on a call, press the Hold key.
To retrieve a held call, press the Hold key again to resume the call.
To redial the last number you dialed:
To perform a blind transfer:
To perform an attended transfer:
When the Message Waiting light is flashing, it means you have messages in your voicemail box.
To retrieve the messages, press the MWI key.
Once the messages have been retrieved, the Message Waiting light will stop flashing.