Call Server

In order to connect phones on your UCX DSM16p to a specific UCX Server, you must enter the IP address of the UCX Server and the port number used by that server for digital phones in the configuration of the DSM16p..

To specify the UCX Server to which the DSM16p should connect to, perform the following steps:

  1. Open the DSM16p Web-based Configuration Utility
  2. From the Gateway tab, select Call Server
  3. In the Primary Server IP Address field, enter the IP address of the UCX Server.
  4. If the UCX Server does not use the default port number (7000) for digital phones, enter the port number in the Primary Server Port field.
  5. Press the Save Changes button to update the configuration of the UCX Digital Station Module.


Note: The DSM16p system does not initiate any communication with UCX Server until a valid license is activated. (See DSM16 - Licenses)

Alternate Server IP Address and Port

This functionality is currently not available on the DSM16 Module or the DSM16p.


Page Tags: