Trunk Setup Information Telus provide the following parameters in the information sheet provided to their SIP Trunk account users. Registration Information Trunk Pilot / BTN: 1234567891   (account specific ten digit string)…

Build the SIP TrunkShaw SIP Trunks have been successfully implemented using the following IP Trunk Assistant setup:Open UCX Administration and navigate to PBX / IP Trunk Assistant Click on New AccountIn the Account Name, create a…

The configuration below was successfully used for a deployment of Broadsoft SIP trunk in Jamaica. Trunk Outgoing settings – PEER details username=8766549749 type=peer trustrpid=yes sendrpid=yes secret=****** qualify=yes nat=yes insecure=port,invite host=bizvoip.cwjamaica.com fromuser=8766549749…

The configuration below was successfully used for a deployment of Babytel SIP trunk (www.babytel.ca).Trunk Outgoing settings – PEER detailsusername=15149076106type=peersecret=******qualify=yesport=5065outboundproxy=204.101.5.71:5065insecure=port,invitehost=204.101.5.71fromuser=15149076106fromdomain=sip.babytel.cadtmfmode=autodisallow=allcontext=from-trunkauthname=15149076106allow=ulawnat=yescanreinvite=noIncoming Settings – USER Contextusername=15149076106type=userinsecure=port,invitefromuser=15149076106dtmfmode=autodisallow=allcontext=from-trunkallow=ulawRegistration StringCharacters shown as ***** is the secret.15149076106:******@204.101.5.71:5065/15149076106

1. IntroductionThis Application Note describes the steps to configure a SIP trunk between Rogers SIP Trunking Service and an E-MetroTel UCX Server.  Rogers typically provide an Ethernet connection with its…

This page describes how to set up a SIP trunk between a Panasonic NS1000 or NS700 and the UCX. NOTE E-MetroTel's UCX uses a default signaling port UDP 5060 for both…

OverviewThis page provides instructions on how to setup SIP Trunks between a E-Metrotel UCX Server and a Nortel CS1000. NOTE The Nortel/Avaya CS1000 product line is an extremely sophisticated family of…

This page describes how to set up a SIP trunk between a UCX system and  Mitel MX-One. Configuration ExampleFor the configuration example in the sections below, the configuration of the UCX and…

This page describes how to set up a SIP trunk between a UCX system and IP Office. The connection is authenticated using IP addresses or host names of the two…

1. IntroductionThis Application Note describes the steps to configure a SIP trunk between Bell Canada SIP Trunking Service and an E-MetroTel UCx Server.E-MetroTelE-MetroTel UCx Server is a cost-effective SIP Based…