E1/T1 Card – SIP PSTN Gateway Configuration (Third Party PBX)
Background The instructions on this page provide details of how to set up the Galaxy T1/E1 gateway card to act as a PRI Gateway between an E-MetroTel SIP PSTN Trunk…
E1/T1 Card – Updating the Firmware
NOTE The upgrade will take approximately 10 to 15 minutes to complete.. Access to the Configuration GUI will be interrupted and you will have to login again. Manual UpdateConnect to…
E1/T1 Card – UCX Gateway Configuration
BackgroundIn most cases, the E1/T1 Card will be used as a standard gateway interface between the UCX and a physical E1 or T1 connection from the PSTN. This requires the…
E1/T1 Card – Activation
Activation RequirementWhen you first log in to the E1/T1 Gateway card, the card can be configured even while un-activated. However, the card is not functional for making or receiving calls…
E1/T1 Card – Installation and Access
1. InstallationE-MetroTel has introduced a new E1/T1 Gateway card to replace the Galaxy PRI card, bringing consistency to the user interface and operation across all the gateway cards.The Galaxy E1/T1…
E1/T1 Card – System Menu
StatusSystem InformationThis page displays product information, firmware, system time, and resource usage. Network StatusThis page displays the network parameters and VPN connection status.Port StatusThis page displays the port and channel…