IMPORTANT When you switch between any of the phone type settings, for example changing from Norstar/BCM to the M1/CS1000, Panasonic, or AVAYA settings, you MUST be sure that you have…

In order to connect phones on your DSM16 to a specific UCX Server, you must enter the IP address of the UCX Server and the port number used by that…

OverviewThe DSM16 system must be properly licensed. The basic license for DSM16 will support up to 16 telephone sets. The actual number of sets supported will depend on the total…

Date/TimeThe Date/Time page allows you to view/change the time zone used by the DSM16 and to set the the current date if you are not using Network Time Protocol (NTP) settings..The date, time and time zone configured…

E-MetroTel provides software updates for the DSM16p using an on-line repository. You can use this on-line repository to obtain patches and/or new software releases.Update Software from AdministrationTo update installed software packages from online repositories,…

In certain situations, you may want to turn off or restart your DSM16. In many cases, users simply disconnect and reconnect the power cord to reboot their system. We do…

To change the management password of the DSM16, perform the following steps:Open the DSM16 AdministrationFrom the System tab, select UsersSelect the admin account by clicking on the admin link.  The Edit User "admin" page is presented.  Enter the current password, the…

Network ParametersThe Network Parameters page allows you to view/change the network configuration of the DSM16.To use the DSM16 on your LAN, you may need to change its network configuration to…

When you login to the DSM16 Administration, you are normally presented with the Dashboard page, which provides operational view of the system. If you navigate away from this page, you…

The DSM16 card is configured by default to use DHCP procedures to obtain an IP address on initial connection. This is because it is likely that more than one DSM16p…