Analog Card – System menu – Advanced Configuration
Fax Parameters QoS Settings Analog Settings VOIP Settings Security Settings
Analog Card – System Menu – Port
FXS Port SettingsThe Port Settings menu item allows mapping of the available physical FXS ports to SIP connections back to one or more UCX systems.The page has tabs for Basic, Call, and Advanced settings…
Analog Card – System menu – Profiles
ProfilesProfiles are used to create a specific configuration of SIP, Digitmap, VOIP and Analog settings that can be associated with the physical ports on the card. Up to four (Profile…
Analog Card – System menu – Network Settings
Wan SettingsThis page contains multiple tabs forWAN SettingsMGT SettingsVLAN SettingsLocal DNSAny changes made on a tab must be saved using the Save button prior to changing tabs or to a different menu page.The card…
Analog Card – System menu – Status
System InformationThe System Information page is the normal landing page after logging in to the system after you have activated the system and changed the login password from the default value.Product InformationThe…
Analog Card – Wiring Chart
On the FXS16 you can connect 16 analog telephones to the RJ-21 telephony connector on the system. The following table provides information about the wiring of the RJ-21 telephony connector:…
Analog Card – Extend E-MetroTel SIP Trunks to 3rd Party systems using FXS Ports
For customers interested in moving to SIP trunks but are not quite ready to deploy E-MetroTel UCX software to replace their legacy PBX, E-MetroTel FXS Gateway cards can be used. The…
Analog Card – Create Trunk using FXO port
This section describes the steps required to create a fully functional analog trunk or trunk group for the UCX using the GUI interface on both the UCX and an FXOS8…
Analog Card – Create Extension using FXS port
This section describes the steps required to create a fully functional analog extension for the UCX using the GUI interface on both the UCX and the Analog Gateway card.E-MetroTel advises…
Analog Card – Updating the Firmware
Overview It is a simple process to perform firmware updates on Analog Gateway cards (FXS, FXO, or FXO/FXS) as a factory reset is no longer required. Update the firmware Connect to…