PrerequisitesTools#2 Philips screwdriverAccessoriesThe following accessories are shipped with the FXO-8P card. if you are re-using an existing card and do not have the following accessories, please contact E-MetroTel to order…

PrerequisitesTools#2 Philips screwdriverAccessoriesThe following accessories are shipped with the FXO-8P card. if you are re-using an existing card and do not have the following accessories, please contact E-MetroTel to order…

NOTE Please note that prior to physicallly installing the PRI-1S card in the Galaxy 250 system, the Card Interface Selection must be set for either E1 or T1 framing to…

The FXO 8-port interface card starting from version 1.4 can be configured to power from the PCI-E slot, i.e. an external power source is not required.To enable power from the…

Wall Mounting Holes The following diagram depicts the spacing of the holes on the bottom of the unit designed for wall mounting. If printed from this web page it will…

The UCX system is shipped with two Network Interface Cards (NICs).The Ethernet ports are Eth0 (port on the left) and Eth1 (port on the right).The Eth0 port on UCX systems by default uses…

When unpacking the UCX system, please ensure that you received all the equipment that is listed on the shipping box.The Galaxy 250 package includes the following items:1 x Galaxy 250 Appliance1…