UCX1000 – LED States
On the UCX1000 Server, there are two LEDs for each drive. The LED on top is the Status indicator. The LED on the bottom is the Activity indicator. The Activity indicator flashes whenever there…
UCX1000 – Replace Hard Drive
NOTE It is recommended that you always use a static mat and static strap while working on components in the interior of the system. To ensure proper operation and cooling,…
UCX1000 – Install Interface Card (R730)
NOTE Do not operate the system without the cover for a duration exceeding five minutes. It is recommended that you always use a static mat and static strap while working…
UCX1000 – Install Interface Card (R530)
NOTE Do not operate the system without the cover for a duration exceeding five minutes. It is recommended that you always use a static mat and static strap while working…
UCX1000 – Connect to the Network
The UCX system is shipped with two Network Interface Cards (NICs).The Ethernet ports are labelled T-LAN and C-LAN.The C-LAN port on UCX systems by default uses the static IP address…