Administration

UCX Administration
  • PBX Configuration, UCX Administration
Basic – Adding InfinityOne Extension

To configure an InfinityOne extension, perform the following steps:

  1. Open UCX Administration
  2. From the PBX tab, select PBX Configuration
  3. From the left side column, select Extensions
  4. In the drop-down list box, select the device type XSTIM Device and press the Submit button
  5. Enter the User Extension and Display Name
  6. Enter 0 for the MAC address
  7. Press the Submit button to create the extension
  8. From the right side column, click on the link associated with the extension that was just created
  9. Click on the Edit XSTIM Properties link
  10. From the Device type drop-down list, select Infinity
  11. Configure the Number of Lines
    AddInfinityOneDeviceType.png
  12. Under Key Expansion Modules, the default Module Type is None. This setting will allow the client to have up to 24 keys.
  13. If you need more than 24 keys, select Infinity Key Expansion – 24 buttons from the pull-down list.
    The InfinityOne client can support up to 4 Key Expansion Modules for a total of 120 keys. Select the Number of Modules from the pull-down list.
    AddInfinityOneKeyExpMod.png
  14. Under Programmable Keys, configure the keys as desired
  15. Press the Submit Changes button
  16. Press the Apply Config bar

Contents